Rasensamenrechner
Säen Sie einen neuen Rasen an, verdichten Sie schütteren Bestand durch Nachsaat oder bessern Sie Kahlstellen aus? Unser kostenloser Rasensamenrechner ermittelt die genaue Saatgutmenge in kg und Packungsgrößen passend zu Ihrer Rasengrasart (Rohrschwingel, Weidelgras, Wiesenrispe).
Projektmaße
Geben Sie Ihre Maße ein, um den genauen Materialbedarf zu berechnen
Geben Sie oben Maße ein, um Ergebnisse zu sehen.
Schritt-für-Schritt Beispielrechnung
Beispiel: Planting a new 2,000 sq ft lawn (50 ft × 40 ft) with Tall Fescue grass seed, using a 5% spreader overage buffer and $4.50/lb seed pricing.
Calculate Lawn Footprint: 50 ft × 40 ft = 2,000 sq ft.
Determine Application Rate: Tall Fescue new lawn rate = 8.0 lbs per 1,000 sq ft.
Compute Base Seed Weight: (2,000 sq ft ÷ 1,000) × 8.0 lbs = 16.0 lbs.
Add 5% Spreader Buffer: 16.0 lbs × 1.05 = 16.8 lbs total seed.
Recommend Retail Bag: 16.8 lbs is best fulfilled with 1 × 20 lb bag (leaving a small 3.2 lb reserve for future spot touch-ups).
Estimate Material Cost: 16.8 lbs × $4.50/lb = $75.60.
Grass Seed Weight Formula
Total Seed (lbs) = ((Lawn Area ÷ 1,000) × Seeding Rate) × (1 + Waste %) Lawn area is calculated based on your yard's geometric footprint (Length × Width for rectangular lawns, π × Radius² for circular zones, or the sum of both rectangles for L-shaped yards). Dividing area by 1,000 sq ft (or 100 m² in metric) and multiplying by the agronomic seeding rate for your selected grass species and seeding method yields base seed requirement. Adding a 5% to 10% overage buffer accounts for broadcast spreader overlap, irregular border trimming, and bird predation.
Formelvariablen
Berechnungsgrundlagen
- Seed count per pound varies dramatically by species: Kentucky Bluegrass (~1.5 million seeds/lb) requires only 2.5 lbs/1,000 sq ft, whereas Tall Fescue (~225,000 seeds/lb) requires 8.0 lbs/1,000 sq ft.
- Overseeding existing turf requires approximately 50% of new lawn rates to thicken canopy without suffocating existing root structures.
- Standard retail bags are sold in 3 lb, 7 lb, 20 lb, 25 lb, and 50 lb packages (1 kg, 5 kg, 10 kg, 25 kg in metric).
- Seed germination requires consistent surface soil moisture for 14 to 28 days following application.
Häufig Gestellte Fragen
Typische Fragen von Heimwerkern und RenovierernRasensamenrechner
How much grass seed do I need per 1,000 square feet?
Seeding rates depend entirely on grass species: Kentucky Bluegrass requires 2 to 3 lbs/1,000 sq ft because its seeds are tiny (~1.5 million/lb). Tall Fescue requires 6 to 8 lbs/1,000 sq ft because seeds are much larger (~225,000/lb). Ryegrass needs 6 to 7 lbs, Fine Fescue 4 to 5 lbs, and Bermuda grass 1.5 to 2.5 lbs.
What is the difference between seeding a new lawn and overseeding?
Seeding a new lawn on bare prepared soil requires full seeding rates to build a dense groundcover from scratch. Overseeding (interseeding) is done over existing living turf to thicken thinning grass and requires approximately 50% of the new lawn rate.
Can I use this calculator for spot patch repairs?
Yes. For bare patches caused by pets, pests, or disease, select "Spot Patch Repair" in the calculator. Patch repair applies seed at approximately 125% of standard density to crowd out opportunistic weeds while roots establish.
Which grass type should I choose for my climate and yard?
Northern/Cool-Season Zones thrive on Tall Fescue (drought and foot traffic resistant), Kentucky Bluegrass (plush self-repairing turf), and Fine Fescue (shade tolerant). Southern/Warm-Season Zones thrive on Bermuda (full sun, high traffic), Zoysia (dense, weed-choking), and St. Augustine / Centipede (low maintenance, acidic soils).
Should I buy extra grass seed?
Yes, purchasing 5% to 10% extra seed is strongly recommended. This accounts for calibration errors on rotary spreaders, runoff on slopes, bird foraging, and provides leftover seed from the exact same batch for spot touch-ups 3 to 4 weeks after germination.
When is the best time of year to seed a lawn?
For cool-season grasses (Fescue, Bluegrass, Ryegrass), late summer to early autumn (late August to mid-October) is ideal because soil is warm, weed pressure is low, and autumn rains assist germination. For warm-season grasses (Bermuda, Zoysia), late spring to early summer (May to June) is best.
How do I properly prepare the soil before spreading seed?
Mow existing grass short, core aerate to relieve compaction, rake away dead thatch, and apply a 1/4-inch topdressing of screened topsoil or compost. After broadcasting seed, lightly rake to achieve good seed-to-soil contact (1/8 to 1/4 inch deep), roll lightly, and water 2 to 3 times daily with light misting until established.
Verwandte Rechner inGarten & Landschaftsbau
Passende Rechner für Ihr Bauvorhaben
Kiesrechner
Ermitteln Sie Kies und Schotter in Tonnen und Kubikmetern für Wege und Einfahrten.
Rindenmulchrechner
Berechnen Sie Rindenmulch in Litern, Kubikmetern und Säcken für Beete.
Mutterboden- & Pflanzerderechner
Berechnen Sie Pflanzerde und Mutterboden in Kubikmetern, Litern und Säcken für Hochbeete und Gärten.
Oberboden- & Mutterbodenrechner
Berechnen Sie Mutterboden und gesiebten Oberboden in Kubikmetern, Tonnen und Säcken für Rasen und Planierung.
Rollrasenrechner
Berechnen Sie Rollrasen-Bahnen, Paletten, Quadratmeter und Materialkosten für Ihren neuen Gartenrasen.